Sting setting sheet MUGEN SEIKI Ver.9701

Name: Date:  /   /    Track:
Engine:

Head clearance:......................mm 

Plug: //////////| Fuel: Body:

Rear spoiler:....................mm 

Muffler:..........................mm
Track Condition:
Front rebound stop 0 mm mm  mm  mm 
Rear rebound stop +3 mm mm  mm  mm 
/ / / / /
/ / / / /
/ / / / /
  Front track width 250 mm  mm  mm  mm 
road clearance 6 mm  mm  mm  mm 
Camber angle -2° / /  / 
toe 0°-out / / /
/ / / / /
  Rear track width 260 mm  mm  mm  mm 
road clearance 7 mm  mm  mm  mm 
camber angle -3° / / /
    / / /
/ / / / /
  Front upper - arm position 2 mm  mm  mm  mm 
/ / / / /
Size:A-B= 0.6 mm mm mm mm
         
  Front anti - swaybar      
Rear anti - swaybar Φ2.8 / / /
Front dumper piston Φ 1Hole / / /
    dumper oil #600 / / /
    spring black      
    spring Adj.Pos. 6.5-7.5 mm  mm  mm  mm 
Rear dumper piston Φ 2Hole / / /
    dumper oil #600 / / /
    spring black / / /
    spring Adj.Pos. 2.5-3.0 mm  mm  mm  mm 
  Front tire type FA35  / / /
Rear tire type FP30  / / /
Front tire dia.(F.T.D.) Φ68 mm mm  mm  mm 
Rear tire dia.(R.T.D.) Φ76 mm mm  mm  mm 
2speed gear 1st. 18/47  / / /
2speed gear 2nd. 20/43  / / /
Engine / tyre-ratio 1st. 36.2 mm  / / /
Engine / tyre-ratio 2nd. 44.0 mm  / / /
Pulley A (25or26) 26      
Over drive ratio 1.005  / / /
/ Race time/Lap / / / /
Best Lap Time (1L) / / / /
/ / / / / /
/ / / / /
/ / / / /
/ / / / /
/ / / / /
/ / / / /
/ / / / /
/ / / / /

  Gear & Tire Ratio Table         Over Drive Ratio Table