MRX-2 4WD setting sheet MUGEN SEIKI Ver.9903
MRX-2 4WD set up sheet MUGEN SEIKI Ver.9903 | |||
Name: Kenji Osaka | Date:2/13/2000 | Track: BOSS JRCC Rd.1 | |
Engine:RX21R JP | Piug:7Tf | Fuel: Byron | Body:
Mugen
Lola Body Position :14 mm Rear spoiler:0 mm |
Head clearance:....... 0.5 mm | Muffler: NOVA 086 Polish mm | ||
Clutch bell clearance: 0.5 mm | |||
Clutch spring adj.nut: (3.5) 1.2 mm | |||
Track condition: |
Front rebound stop | +2 mm | mm | mm | mm | |
Rear rebound stop/ | +10 mm | mm | mm | mm | |
/ | / | / | / | ||
Front damper piston | 1.4X1 | ||||
damper oil | #500 | ||||
spring | Mugen White | / | / | / | |
spring adj. pos. | 5.5 mm | mm | mm | mm | |
Front track width | 252 mm | mm | mm | mm | |
road clearance | 5 mm | mm | mm | mm | |
camber angle | -0.5° | ||||
toe | 1.5°out | ||||
anti-sway bar | |||||
upper arm pos. | 3 mm | mm | mm | mm | |
Rear damper piston | 1.1X2 | ||||
damper oil | #500 | ||||
damper position | 1 | ||||
spring | Mugen Gray | ||||
spring adj. pos. | 0.5 mm | mm | mm | mm | |
Rear track width | 262 mm | mm | mm | mm | |
road clearance | 6 mm | mm | mm | mm | |
camber angle | -1° | ||||
anti-sway bar | 2.4 (5mm) | ||||
toe-in | 1° | ||||
Front tire type | FAH35M | ||||
tire dia. (start) | L63.5/R63.5 | L/R | L/R | L/R | |
tire dia. (finish) | L/R | L/R | L/R | L/R | |
Rear tire type | FPH35M | ||||
tire dia. (start) | L73/R73 | L/R | L/R | L/R | |
tire dia. (finish) | L/R | L/R | L/R | L/R | |
2speed gear 1st. | 17/50 | / | / | / | |
2nd. | 21/47 | / | / | / | |
Roll-cut 1st. | 32.5 mm | mm | mm | mm | |
2nd. | 43.0 mm | mm | mm | mm | |
Pulley A (25 or 26) | 25 | ||||
Over drive ratio | 1.002 | ||||
Track traction | % | % | % | % | |
Result | 20L 5'01"66 | ||||
Best lap time (1L) | 14"73 |