1/10 Scale Nitro 4WD Touring Car MTX7

>> MTX7 Picture <<
Mugen Seiki is proud to introduce the MTX7 1/10th Nitro Touring Car. The MTX7 kit has many high-end improvements to suspension, steering and adjustability to create the ultimate 1/10th nitro Touring Car.
T2005 MTX7 1/10 Nitro Touring Car Kit:
Some of the new features include a new bulk, chassis, bulkhead gear shaft, upper front arm, and servo saver.  The MTX7 has improved rear traction, is more stable, and has a more adjustable steering setup.
MTX7 Features:
- Improvement in rear traction and stability come from the new design that mount the rear
lower arms directly on the rear bulkhead, similar to the MRX6.
- The new LCG rear bulkhead and bulkhead gear shaft (L/R) lower the center of gravity and
make the MTX7 more stable at high speeds and when changing direction.
- The new aluminum servo saver gives more precision and direct steering feel.
- The new aluminum front upper arm bracket improves steering response has more
adjustability.
Now you can adjust the height of the upper arm bracket as well as the length of the upper arms. This feature allows you to tune the MTX7 to a wider range of track conditions.
- The front drive shafts and pivot balls have been changed to increase steering angle for tight
and low grip track conditions.
- Other new parts and features for Mugen Seiki MTX7 include the chassis, front anti-roll bar,
rear differential case, rear shock tower, radio plate, and front upright arms.
Technical Data:
- Length: 380mm
- Width: Max. 200mm adjustable
- Wheel Base: 257.5mm~260.5mm adjustable
- Tread (F/R): 173mm/169mm
- F. Caster Angle: 6.4°~13.8° adjustable
- Gear Ratio: 1st. 7.24:1 / 2nd. 4.69:1
Download:

♦ Parts List 1.87MB
♦ Kit bag details 3.28MB
♦ Setup Sheet 291KB
♦ Instruction Manual 11.0MB
♦ Optional parts
♦ Other optional parts  4.78MB
Other necessary equipment:
2ch Radio and 2 servos / Receiver / Connecting Cable (aprx.150mm) / Receiver Battery / 12 Class Rear Exhaust Engine / Muffler / Manifold / Manifold Spring / Tire & Wheel  / Air Filter / Engine Starter / Body / Body paint tools / Fuel
*The contents are subject to change without notice due to product improvements and specification changes.
*Final production version of product may and will differ from appearance of product shown on this web page.

Copyright © 2019 Mugen Seiki Co., Ltd. All rights reserved.