1/8 Scale Nitro On-Road Car MRX6R 

>> MRX6R Picture <<

The NEW MRX6R has a lot to offer!  More durable, more mid corner steering and simply beautiful.  The new Mugen Seiki MRX6R has been tested and developed by some of the best drivers in the world.  Most of the evolution parts has been proved already by a world's podium finish and the Japanese national title.
MRX6R features:
- Chassis:  
The MRX6R chassis features a new shape, with an additional carbon tray, to fit the weights below the fuel tank.  It improves the durability and center flexibility of the chassis.  This feature was proven at the recent IFMAR Worlds Championship.
- Drive train:
The new multiple bearing clutch system improves durability of bearings and clutch bell itself.  The newly surface treatment of the clutch bell, in combination with the newly produced clutch shoe, will improve the acceleration.  Also used at the IFMAR World Championship.  
- Suspension:
Longer rear lower arm's will improve traction and drivability.
- Front cut radio tray:
A new shape of radio tray will improve mid corner steering.  An optional brace will be available too, to be able to adjust the flexibility of the radio tray in front.
- Front bumper:
The new shape of front bumper will improve the durability of body shell.  It won't touch the ground the same way as the previous one too.
- Battery mount:
The battery mount will be assembled with rubber grommet's, so it has less influence on chassis flexibility.
Download:

Parts List 6.01MB
Kit bag details
1.59MB
Setup Sheet
311KB
Instruction Manual
 18.7MB
Additional Manual 2.97MB
Option parts

Other necessary equipment:
2ch Radio and 2 servos / Receiver / Connecting Cable / Receiver Battery / 21 Class Rear Exhaust Engine / Muffler / Manifold / Manifold Spring / Tire & Wheel  / Air Filter / Engine Starter / Body & Body paint tools / Fuel
Note:
The lead-detachable Servo from Sanwa cannot be used for the throttle/brake (can be used for the steering).
Require longer battery lead wire 150mm (Not include the connector).
You will find how to install Sanwa Built-in antenna receiver (RX-481, 482) to prevent any electrical interference. Click HERE for more information.
*The contents are subject to change without notice due to product improvements and specification changes.
*Final production version of product may and will differ from appearance of product shown on this web page.

Copyright © 2018 Mugen Seiki Co., Ltd. All rights reserved.