MRX-4X Conversion Kit Spec.

H0080 MRX-4X Conversion Kit

<Technical Data>

+ Length----------------442mm

+ Width-----------------262mm

+ Wheel Base----------299mm

+ Tread (F/R)---------216.2mm/202.5mm

+ Gear Ratio---------1st. 6.92:1/2nd. 5.52:1

+ Weight------------------N/A




This product is a conversion kit to upgrade from MRX-4R to MRX-4X.
Other necessary equipment: MRX-4R, 2ch Propo and servo,
Receiver Battery, 21 Rear Exhaust Engine, Muffler, Manifold,
Manifold Spring, Tire & Wheel, Engine Starter, Fuel, and tools.



+ MRX-4X Conversion Kit photos
+ Parts List (PDF)
+ Setting Sheet (PDF)
+ Instruction Manual (PDF)



<Contents of MRX-4X conversion kit>

H0136-B	Rear Upper Arm
H0140-B	Rear Upright
H0148-B	Front Bulkhead
H0149-B	Rear Bulkhead
H0181D	3 mm Spacer (3.0mm)
H0188	Eccentric Hub
H0189	Upright Spacer
H0190	Brake Bracket
H0191	Rear Lower Arm Mount
H0374	Battery Holder FRP
H0466-B	Rear Body Mount
H0475	Chassis
H0560	Front Damper Stay
H0561	Rear Damper Stay
H0562	Damper Case
H0571	Damper Parts
H0858	Ball Link 6mm (S)

<Details of MRX-4X conversion kit>

+ Rear Upper Arm (2mm Shorter)

+ Brake Bracket & Rear Upper Arm Mount for short rear upper arm.

+ Rear upright (Adjustable wheel offset)

+ Front bulkhead. You can change the tension of the belt (5 different positions).

+ Rear bulkhead. You can change the tension of the belt (5 different positions).

+ New Eccentric Hub.

+ 5mm New Rear Lower Arm Mount

+ New Battery Holder (FRP) & Chassis

+ New Long rear body Mount Arm & Rear Body Mount Centering Parts

+ New Damper End Parts & Rear Damper Case as same as front.

+ F/R Damper Stay, Al. Spacer for rear wheel offset, Decal, Set-up sheet are included.