MBX-7T Spec.

1/8 Scale Nitro 4WD Racing Truggy MBX-7T

>> MBX-7T Picture <<

All new MBX-7T 1/8 Scale Nitro 4WD Racing Truggy, based off the World Champion
MBX7 buggy platform.

MBX-7T Features:		Technical Data:

♦ 3mm A-7075 hard anodized chassis		♦ Width: 413mm
♦ Lightweight steel spur gear		♦ Wheel Base: 373~278mm Adj.
♦ Lightweight conical gears		♦ Gear Ratio: 16.28:1
♦ Straight cut conical and ring gears
♦ Specially designed front and rear lower suspension arm
♦ 5mm A7075 aluminum front shock tower
♦ 4mm A7075 aluminum rear shock tower
♦ 5mm A7075 aluminum lower suspension plates
♦ Narrow Wheel Hub (11.5)
♦ High down- force wing which is adjustable front and back
♦ Stylish cab forward Truggy body

Differentials Oils:

Front - 10,000 wt Oil (B0317) Center - 7,000 wt Oil (B0323) Rear - 4,000 wt Oil (B0335)

Shocks and Springs:

Front - 600 wt Oil (B0326) / φ1.5 L70/8.0T Spring (E0572) / φ1.35 5H Taper Piston (E0580) Rear - 600 wt Oil (B0326) / φ1.5 L86/8.5T Spring (E0575) / φ1.35 5H Taper Piston (E0580)

Download:

♦ Parts List 512KB ♦ Setup Sheet 547KB ♦ Instruction Manual 13.1MB

Other necessary equipment:

2ch Radio and 2 servos/Receiver/Battery (Flat Pack)/Rear Exhaust Engine/Muffler & Manifold//Tires w/Wheels/Engine Starter/Body paint/Tools/Fuel.

*The contents are subject to change without notice due to product improvements and specification changes.
*Final production version of product may and will differ from appearance of product shown on this web page.