MBX-7 M-Spec.

MBX-7 M-SPEC Factory Built 1/8 Scale Nitro 4WD Racing Buggy

World champion MBX-7 1/8th Nitro 4WD Off-Road Racing Buggy is now available pre-built with a full race set up right out of the box!

MBX-7 M-Spec Features:

♦ 3mm A-7075 hard anodized chassis
♦ Lightweight spur gear and conical gears
♦ Straight cut conical and ring gears
♦ Specialized designed front upper and lower suspension arm, front hub carriers,
rear suspension arms and hub carriers.
♦ Fully adjustable steering with new geometry, servo saver and ackerman plate.
♦ 15mm hard anodized threaded shocks with 3.5mm shock shaft and rubber shock boots
♦ 5mm A7075 aluminum front shock tower
♦ 4mm A7075 aluminum rear shock tower
♦ 5mm A7075 aluminum lower suspension mounts for optimized geometry
♦ Specialized brake system with new brake cam front/rear brakes, brake linkage
and brake disc
♦ Small composite molded receiver box & low center of gravity battery holder
♦ Special designed fuel tank with an internal fuel clunk pick up
♦ E0710 heavy duty aluminum clutch shoes
♦ High down force wing which is adjustable forward and back
♦ Stylish mid cab body

M-Spec Features:

♦ Pre-Assembled Differentials and Shocks with factory Mugen differential and shock oils

Differentials Oils:

Front - 5000 wt Oil (B0322)
Center - 7000 wt Oil (B0323)
Rear - 5000 wt Oil (B0322)

Shocks and Springs:

Front - 600 wt Oil (B0326) / φ1.5 L70/8.0T Spring (E0572) / φ1.35 5H Taper Piston (E0580)
Rear - 550 wt Oil (B0333) / φ1.5 L86/8.5T Spring (E0575) / φ1.35 5H Taper Piston (E0580)

♦ Pre-cut Body
♦ Pre-set Camber, Caster, Ride Height, Front Tow In/Out and Rear Tow in all to Mugen Race
Team settings.

Download:

♦ Parts List 2.90MB
♦ Setting Sheet 105KB
♦ Instruction Manual 12.8MB
♦ Kit bag details 2.04MB

Other necessary equipment:

2ch Propo and 2 servo/Receiver Battery/21 Class Rear Exhaust Engine (only chassis kit)/Muffler/Manifold/Manifold Spring/Tire w/Wheel&Inner Foam/Engine Starter/Body paint tools/Fuel

*The contents are subject to change without notice due to product improvements and specification changes.

*Final production version of product may and will differ from appearance of product shown on this web page.