Clutch

Centrifugal clutch composed of 4 shoe put on
the flywheel, and the ring-shaped. Shift timing
can be adjusted with the clutch spring.
Pinion Gear prepares for 19T and 21T in the
1st.Gear and 17T in the 2nd Gear. 1st Gear
and 2nd Gear thicken gear's own width,
and durability improves, too.

2 Speed Gear Box

2 Speed Gear System which is not a usual cam
type and that shoe of 2 piece is adopted and
2 Speed Gear that it was smooth possible.
Shift timing can be adjusted with the screw
inside the shoe. It is as small as possible and
the cutting of clutch, clutch-meet improves
the shoe itself by making it thin remarkably.
1st Gear and 2nd Gear thicken gear's own
width, and durability improves, too.

Front Body Mount

The Body Mount Post which the base plate
raised strength of Front Bulk Head and it
absorbs a shock in crush. The body position
can be changed by turning Body Mount Post.
(It is done at the same time with Rear Body
mount)　

Front Anti-Roll Bar

The holder which the angle adjustment-type
bar of 2 piece and bump stop, rebound stop of
suspension can adjust is adopted.

Damper

Hard Alumite Coats Damper Case, and the
durability of Damper Case is improved
remarkably. The dirt of damper oil is improved
remarkably, too.